Industrial wireless access for machines via Bluetooth and WLAN

Give easy and robust industrial wireless access to your industrial cabinets or machines using the Anybus Wireless Bolt.

Anybus® Wireless Bolt™

Bring Your Own Device (BYOD) | Easy to Use via Bluetooth or Wireless LAN connection.

无线螺栓是一个解决方案的所有设备that's both flexible and mobile. Plug it in and BYOD either via Bluetooth or Wireless LAN (WLAN). If you want to learn more about the Wireless Bolt, check out the video where we talk more about the Bolt and what it's capable of.

thermometer icon

Fits harsh environments

Anybus Wireless Bolt has a unique form factor with it’s through hole mounting method. This fits the harsh environment often found in Factory Automation.

tablet icon

BYOD

Bring Your Own Device phone/tablet/pc. Bolt is easy to Use via Bluetooth or Wireless LAN connection.

Icon for wireless

Bluetooth or Wi-Fi

Anybus Wireless Bolt Serial enables you to connect industrial machines and devices to a wireless network with Bluetooth or Wi-Fi.

thunderbolt

Low Power technologies

Need an Internet connection for your remote equipment? Bolt IoT provides a cheap industrial Low Power Wide Area connection using the LTE technologies CAT-M1 and NB-IoT with 2G fallback.

Low power low bandwidth icon

Low Power and Low Bandwidth

Bolt IoT gives Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost.

wrench screwdriver icon

M50

Intuitive and interesting form-factor; M50 through-hole mount on any flat surface

Anybus Wireless Bolt product

Anybus Wireless Bolt CAN

Anybus Wireless Bolt CAN

Anybus无线螺栓可以使您连接dustrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, or Wi-Fi (Wireless LAN). It converts CAN data to/from TCP/IP communication over the wireless link.

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an industrial IP66/IP67 protection class.

Bolt Black White 18 pin

FEATURES & BENEFITS

  • CAN 2.0A/B (11/29 bit identifier) to wireless and TCP/IP conversion
  • Supports e.g. J1939 and CANopen and transparent transfer of any CAN protocol
  • Wireless communication using Wi-Fi or Bluetooth
  • CAN cable replacement “CAN to wireless to CAN” using 2xBolts
  • Wide baudrate support 10 kbps up to 1000 kbps
  • Up to 28 freely customizable CAN receive pass-through filters
  • Web-configuration over wireless or Ethernet LAN
  • Available with white top Sunbolt enabling 30% higher surrounding temperature compared to black in direct sunlight
  • Full compatibility with Anybus Wireless Bridge and Anybus Wireless Bolt Ethernet
  • CLI (Command Line Interface) for configuration and diagnostics
  • Individual baudrate support in a muilti-node network

Key Use Cases

  • Cable Replacement, point-to-point; CAN to Bolt to WLAN/BT to Bolt to CAN

Bolt CAN key use case 1

  • Common bus, multi-point; CAN to Bolt to WLAN/BT to many Bolt to CAN

Up to 8 wireless nodes (1 master and 7 slaves). Wireless multi-drop (master–slave). The Bolt is transparent. Message from host to Bolt is forwarded to all slaves. Every slave response forwarded to the host.

Bolt CAN key use case 2

  • TCP/IP socket to CAN -PC program or Phone/Tablet App to CAN via TCP/IP socket.

Bolt CAN key use case 3

Technical Specifications

CAN interface

CAN 2.0A/B (11/29 bit identifier).
CAN Bitrate 10 kbps to 1000 kbps freely selectable.
Up to 28 freely customizable CAN receive pass-through filters.
Advanced settings for Prescaler, Time Seg 1+2, SJW.
Transparent transfer of any CAN based protocol including e.g. J1939 and CANopen.

Ethernet interface

Ethernet: 10/100BASE-T with automatic MDI/MDIX auto cross-over detection. For configuration only.

WiFi interface

Wireless standards: IEEE 802.11 a, b, g, n, d.
Operation modes: Access point or Client
Wireless LAN bands: 2.4GHz and 5GHz
RF output power: 18 dBm EIRP (including antenna gain 3dBi)
Max number of stations for access point: 7
Power consumption:[email protected]
Net data throughput: 20 Mbps. Link speed: max 65 Mbps (802.11n SISO)
Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP including MS-CHAP.

Bluetooth interface

Wireless standards (profiles): PANU & NAP
Operation modes: Access point or Client
RF output power: 14 dBm EIRP (including antenna gain 3dBi)
Bluetooth conducted sensitivity: -90 dBm
Max number of slaves for access point: 7
Power consumption: 36[email protected]
Net data throughput: ~1 Mbps
Bluetooth version support: Classic Bluetooth v2.1
Security: Authentication & Authorization, Encryption & Data Protection,
Privacy & Confidentiality, NIST Compliant, FIPS Approved

Dimensions

Diameter: 68 mm. Height: 75 mm (95 mm including connector. Outside height: 41 mm)

Weight

81g

Temperature Bolt (black)

Shadow: -40 to +65 °C
Direct sunlight: -40 to +45 °C
Storage temperature: -40 to +85 °C

Temperature Sunbolt (white) Shadow and direct sunlight: -40 to +65 °C
Storage temperature: -40 to +85 °C
Output Power WiFi 18 dBm EIRP - Bluetooth 14 dBm EIRP - Bluetooth Low Energy 10 dBm EIRP
All including antenna gain 3dBi
Power Supply 9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
Power Consumption 0.7W idle, 1.7W max ([email protected]with Wireless LAN and[email protected]with Bluetooth)
Enclosure material Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 476C. Bottom: Celanex: XFR 6840 GF15. PBT glass reinforced plastic.
Mechanical rating IP66 and IP67 for top (outside the host), IP21 for bottom (inside the host), UL NEMA 4X
Mounting M50 screw and nut (50.5 mm hole needed)
Max Range 100 meters
Antenna One built in antenna
Connector Included plug connector (2x9p; 3.5mm, Phoenix DFMC 1.5/9-ST-3.5, push-in spring connection)
Vibration Compatibility 根据IEC 60068 - 2 Sinosodial振动测试-6:2007 and with extra severities; Number of axes: 3 mutually perpendicular (X:Y:Z), Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g.
Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms.
Certifications
Europe ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. CE, 2014/53/EU Radio Equipment Directive (RED)
USA FCC 47 CFR part 15, subpart B. UL: Ind. Cont. Eq. also
Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D, T4.
UL file: E203225
Canada ICES-003
Japan MIC
Other countries Brazil, Australia, Colombia, Turkey, Malaysia, Argentina, India, China, Korea, United Kingdom

Ordering information

Order Code AWB2020, AWB2021
Included components AWB2020: Anybus Wireless Bolt CAN - Black, 18-pin connector, 1x Installation guide.

AWB2021: Anybus Wireless Bolt CAN - Sunbolt white top, black base, 18-pin connector, 1x Installation guide.

Starterkit

AWB2306: Anybus Wireless Bolt CAN Starterkit, 2 x Bolt CAN, cables & 2 x power world supply

Max 1 Pcs / Customer.

Accessories

Order Code: 024703; Cable kit. Molded RJ45 Bolt connector wired with 1.5m Ethernet cable and 24 VDC power supply (world) + Extra Ethernet cable fastening to avoid cable strand breaks.

Order Code: 024704; Bolt terminal to RJ45 female connector with total length of 20 cm.

Order Code:024708; Bolt base protector; Read more about the base protectorhere.

Order Code:024709; Bolt base Protector and Mounting Bracket kit; Read more about the base protectorhere.

3 year guarantee. For purchasing instructions and terms and conditions, see:How to buy

Anybus Wireless Bolt – Overview
Click to see more...

Improve operator safety

A machine operator or technician does not need to be physically located at the machine to gain access. Ideal if space is limited or your unable to open the cabinet doors or improving operator safety in fenced-off areas within a factory.

Configure machines wireless

Anybus Wireless Bolt gives you direct access to configure or troubleshoot your machinery. With a range of 100 meters you can access the internal web pages via a laptop, tablet or smartphone. BYOD (Bring Your Own Device) means that you no longer need an expensive HMI.

All-in-one solution

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an exterior IP67 protection class.

Improve your outdoor wireless connections with Anybus Sunbolt

Hot conditions like constant exposure to sun can negatively affect the performance and life span of any electronics supplying you with wireless connections. The Anybus Sunbolt absorbs 30% less sunheat than the original black Anybus Bolt making it a perfect fit for outdoor applications. Improve connection performance, extend the life span of the bolt by up to 70% and limit the risk of errors in the electronics for your outdoor applications.

Anybus Wireless Bolt
Anybus Wireless

Case Study 1080 Motion

1080 Motion: Anybus wireless technology used for athlete testing Swedish pioneers.
Brochure

Wireless connectivity

Read our wireless connectivity solutions brochure that will help you find what you are looking for.
Baidu