The Master Simulator is an easy to use tool to test the CANopen slave functionality of any fieldbus device.
AUTOMATIC SCAN
The automatic Slave identification functionality permits communication to almost any CANopen slave device even if the normally required EDS file is not available. Any CANopen slave can be set into operation. User friendly dialogs are used to exchange cyclic I/O or explicit message parameter data.
The Master Simulator consists of a Windows based Software and a CANopen USB-interface circuitry (Dongle). The Dongle is plugged into the USB port of the PC and provides on the other side a 9-pin D-Sub connector as the CANopen Interface. The Dongle is powered from the USB port.