Connectez vos réseaux industriels et vos appareils existants à l’OPC UA ou au MQTT.

Les passerrelle Anybus IoT X-gateways et les communicateurs vous permettent d’interconnecter en toute transparence les appareils existants et les systèmes de contrôle des automates entre les réseaux industriels et les standards OPC UA/MQTT. Les réseaux et les appareils sont sécurisés et isolés, tandis que le flux de données est contrôlé depuis un dispositif indépendant.

En savoir plus

ab7079-anybus-communicator-serial-iiot-300-526

Nouveau: Le Anybus Communicator IIoT

Le Communicator Anybus IIoT est une passerelle de conversion de protocole éprouvée et fiable, qui connecte des dispositifs et équipements industriels hors réseau à des systèmes de l’Internet des Objets industriels (IIoT). La passerelle effectue une conversion de protocole intelligente et présente les données série sous forme de données IIoT balisées OPC UA ou MQTT.

En savoir plus

EtherNet/IP to Serial Linking Device

Connect any RS-232/422/485 serial device to ControlLogix® or CompactLogix® controllers with an EtherNet/IP interface.

The Linking Device performs an intelligent protocol conversion and presents the serial data to the Logix PLC as easily processed I/O data. This offloads your Logix PLC from working with additional calculations.

CONVERT ALMOST ANY TYPE OF SERIAL PROTOCOL

The Linking Device is capable of converting almost any type of serial protocol such as Modbus RTU, DF1, ASCII, or any other type of proprietary; Request/Response or Produce/Consume protocol.

SEAMLESS INTEGRATION WITH STUDIO 5000

With its unique Studio 5000® Logix designer integration, everything is accessible from within Studio 5000, including then serial network configuration. No extra 3rd-party software, licenses or programming required.

CONNECT, CONFIGURE, DONE

EtherNet/IP Linking Devices are configured using a Custom Add On Profile for Studio 5000 Logix Designer. This dynamically generates data structures for each device connected. No ladder logic files (add on instructions) needed.

Furthermore, it also supports automatic generation of named and structured Studio 5000 controller tags, which eliminates the need to create alias tags

连接设备HMS-EN2SE-R HERO_300x300
Support Pages

Features and benefits

EtherNet/IP interface features

Technical specifications

Features and benefits

  • Enables the retro-fitting of existing serial RS232/422/485 devices with Logix PLCs with EtherNet/IP
  • No hardware or software changes, for the connected device
  • Connects up to 31 serial nodes via RS-485
  • Up to 500 bytes of Input data and 496 bytes of Output data
  • Speed up configuration through a seamless integration with Studio 5000 Logix Designer
  • Compatible with all ControlLogix and CompactLogix PLCs supporting EtherNet/IP
  • Easy to setup with Custom Add On Profile with no programming required!
  • Everything configured through Studio5000®, no 3rd party software or licenses needed

EtherNet/IP interface features

The Linking Device has the very latest ODVA EtherNet/IP adapter functionality

  • Dual EtherNet/IP ports 10/100Mbit, full or half-duplex operation
  • Announced-based DLR (Device Level Ring) and linear network topology supported
  • Support for multiple (Exclusive Owners) I/O connections (Max 10)
  • ODVA EtherNet/IP conformance tested

EtherNet/IP interface features

The Linking Device has the very latest ODVA EtherNet/IP adapter functionality

  • Dual EtherNet/IP ports 10/100Mbit, full or half-duplex operation
  • Beacon-based DLR (Device Level Ring) and linear network topology supported
  • Support for multiple (Exclusive Owners) I/O connections (Max 10)
  • ODVA EtherNet/IP conformance tested

Technical specifications

Dimensions(L•W•H) 120 x 75 x 25mm or 4,72 x 2,95x 1,06"
Weight 150g, 0,33lb
Operating temperature 0 to +55 °C or 0 to +131 °F
Storage temperature
 -40 to +85 °C or -40 to +185 °F
Power supply 24 VDC +/- 10%
Current consumption
 max. 300mA (Typical 100mA)
Enclosure material PC ABS, UL94
Installation position 垂直
Galvanic isolation
 YES, on both BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
Mounting DIN-rail (EN 50022 standard) or Wall mount
Serial baudrate 1,2-57,6 kbit/s
EtherNet/IP baudrate 10/100 Mbit/s autodetect
EtherNet/IP connector 2x RJ45
EtherNet/IP address Any valid IP address can be used
TCP/IP settings Configurable via web-page, configuration tool, DHCP/ARP or via DIP switches
Certifications
 ODVA, CE,CULUS, ATEX/Haz.Loc

How to configure

Ordering information

Purchasing instructions and terms and conditions:How to buy

Order Code

HMS-EN2SE-R
Included components HMS-EN2SE-R Linking Device, Installation guide,
D-sub connector with screw terminals for sub-network.
(Power supply not included)
Optional Accessories USB-RS-232 configuration adapter (Order Code 019570)
Guarantee 3 years

    Related products

Ce site utilise des cookies pour améliorer votre expérience utilisateur

En utilisant notre site web, vous acceptez l’utilisation des cookies.

En savoir plus Oui, j’accepte
Baidu